Scroll down to see all TrueFog products or click to return to our home page!

TRUEFOG, USA - ADVANCED DIGITALLY CONTROLLED FOG MODULES Our Programmable Logic Control centers allow for the complete control of all necessary functions for proper operation of the Truefog system in virtually any technical application. This equipment is designed for use with Technical (RO) water with all wetted surfaces made of 316 stainless steel and include every imaginable option for safe and reliable operation in any environment or application. The wide range of the Advanced TrueFog industrial quality pump modules features and options include; Temperature Set Level Control Humidification Set Level Control  Automated Zone Control (Multiple) Wind Speed Control Wind Direction Control Intermittent On/Off Timed Control Chemical Injection Feed Pump Control Emergency Shut Off Low Water Shut Down (Pump Protection) World-Wide PC Ethernet Control Of All Functions E-mail System Status to Pager, Cell Phone or PC Available in virtually any size with a nozzle capacity from One up to Infinity. TrueFog ADVANCED SERIES fog modules operate at pressures between 800 and 2000 PSI.  based on serious system design experience by the engineering staff at level FIVE within the TrueFog organization. Our in-house engineering and design team consists of degreed engineers working along side our company designers and managers with practical experience and who have led this industry for over 28 years specializing in fogging system for thousands of customers world wide. Just a few examples of the most popular applications include; Odor Control Greenhouse Temperature & Humidification Control Dust Control Industrial Humidification Control Wood Production Facilities Municipal Sewer Treatment Plants Municipal Waste Disposal Sites Waste Transfer Stations Static Electricity Reduction Turbine Air Inlet Cooling Wine Barrel Storage   ECONOMY - E SERIES PRE-PACKAGED KITS  E-Series Pump modules by TrueFog include; rubber isolated mounting base, pressure regulator / unloader, pressure gage, inlet shut-off solenoid, 110/220 volt 1725 RPM 1.5 HP to 5.0 HP / 60 Hz, industrial quality continuous duty Baldor motor, accumulator and vibration shock absorbers. Specify voltage at time of order.  E SERIES PRE-PACKAGED KITS INCLUDE: E-Series Pump Module, TrueFlex line, fog nozzles, nozzle ports, plugs, couplings, port crimping tool, ferrules, low pressure feed line and fittings, industrial duty 5 micron filtration system, including, filter and filter housing, low pressure inlet supply line and connection fittings, including end cap and automatic drain valve, rubber insulated stainless steel clamps and screws for TrueFlex fog line, fog line tubing cutter, re-usable hose fittings for high pressure TrueFlex connections.    These kits, as with all TrueFog products, consist of all industrial quality component parts and all parts are rated at or above the operating pressure advertised. All fittings are made up with solid industrial high-pressure rated hydraulic connections, we do not use un-safe, low-pressure Slip-Lock type fittings on any TrueFog system. In 28 years, we have sold and installed more fogging and misting systems than any other company in the world. With thousands of TrueFog systems and millions of TrueFog nozzles sold and in service around the world, we have never had a single nozzle or system returned for any reason, NEVER   TRUEFOG, USA E-SERIES FOG PUMP MODULES & COMPLETE FOG KITS MODEL NOZZLE'S GPM H P PUMP ONLY PRICE KIT PRICE TFTT5051EBF 30 0.5 1.5 $ 1490.00 $ TBA TFTT9061EBF 65 1.1 1.5 $ 1575.00 $ TBA TFTT9051EBF 110 2.0 1.5 $ 1675.00 $ TBA TFTT2536EBF 175 3.6 5.0 $ 2390.00 $ TBA TFEZ2542E 200 4.2 5.0 $ 2590.00 $ TBA TFEZ2545E 230 4.6 5.0 $ 2890.00 $ TBA

SERIES 450-S - STAINLESS STEEL CLEANABLE FOG NOZZLE  INDUSTRIAL DUTY - ALL STAINLESS STEEL The worlds first fully repairable and cleanable fog nozzle. This HIGH QUALITY ALL STAINLESS STEEL Industrial duty nozzle with anti-drip. For continuous 10 year duty. Also used as a quality replacement in most quality brands of fog systems using the 1/8 inch platform. The 450-SS Produces superfine 10 micron water droplets with a .008 nozzle orifice. 10 micron droplets are 1/10 - the diameter of a human hair. The Unique design allows for the removal of the internal piston for cleaning. This is the only nozzle made in the world with this feature allow for the cleaning of the entire nozzle, saving money while doubling the operational life over that of the original design. The standard check valve on each nozzle prevents the nozzle from dripping after shut down and reduces calcium build-up, also reducing maintenance costs and downtime. These nozzles are for continuous duty FOG applications. All TrueFog, USA Nozzles are delivered fully assembled and ready to install. PART NUMBER THREAD SIZE OPERATING PRESSURE FLOW @ 1000 PSI CONSTRUCTION MATERIALS PRICE EACH TF-450-S 1/8 MPT 1000 0.0210 ALL STAINLESS $ 18.95

 

SERIES 100S - STAINLESS STEEL FOG NOZZLE  INDUSTRIAL DUTY - ALL STAINLESS STEEL This HIGHEST QUALITY ALL STAINLESS STEEL Industrial duty nozzle with anti-drip. For continuous 10 year duty used in both our 12/24 thread size stainless steel and super-flex fog line. Also used as quality replacement in most quality brands of fog systems. Produces superfine 10 micron water droplets and 0.008" nozzle orifice. 10 micron droplets are 1/10 - the diameter of a human hair. Unique check valve prevents the nozzle from dripping after shut down and reduces calcium build-up. These nozzles are for continuous duty FOG applications. All TrueFog, USA Nozzles are delivered fully assembled and ready to install. The new 100SC version of this popular nozzle is fully cleanable and repairable allowing for extra years of service duty. PART NUMBER THREAD SIZE OPERATING PRESSURE FLOW @ 1000 PSI CONSTRUCTION MATERIALS PRICE EACH 100 S 12/24 1000 0.0210 ALL STAINLESS $ 15.95 100 SC 12/24 1000 0.0210 ALL STAINLESS $ 18.95   SERIES 100B - BRONZE FITTED FOG NOZZLE  INDUSTRIAL DUTY BRONZE FITTED - STAINLESS STEEL This TOP QUALITY fog nozzle with anti-drip valve. Used in both our 12/24 thread sized stainless steel and super-flex fog line. Also used as quality replacements for most brands of fog systems. Produces superfine 10 micron water droplets and 0.008" nozzle orifice. 10 micron droplets are 1/10 - the diameter of a human hair. Unique check valve prevents the nozzle from dripping after shut down and reduces calcium build-up. These nozzles are for intermittent industrial duty FOG applications. All TrueFog, USA Nozzles are delivered fully assembled and ready to install. The new 100BC version of this popular nozzle is fully cleanable and repairable allowing for extra years of service duty. PART NUMBER THREAD SIZE OPERATING PRESSURE CONSTRUCTION MATERIALS FLOW @1000 PSI PRICE EACH 100 B 12/24 1000 BRONZE FITTED 0.0210 $ 8.95 100 BC 12/24 1000 BRONZE FITTED 0.0210 $ 11.95   STAINLESS STEEL FOG LINE       Our 316 grade stainless steel fog line is the best money can buy. For use in highly technical installation such as RO water systems.  With our 3/8's inch stainless tubing the customer will experience years of trouble free industrial duty service with little or no maintenance.  Sold in sections of 20 feet. We also offer a complete line of stainless steel or brass fittings to insure simple installation and the peace of mind that this quality product brings to any industrial application demanding the best. Available in any nozzle configuration or spacing.  SAME DAY SHIPPING PART NUMBER NOZZLE SPACING TUBE SIZE NOZZLE THREAD SIZE MATERIAL GRADE S-316-12 12 INCH 3/8 12/24 316 STAINLESS S-316-18 18 INCH 3/8 12/24 316 STAINLESS S-316-24 24 INCH 3/8 12/24 316 STAINLESS Available in any nozzle configuration or spacing pattern TRUEFLEX FOG SYSTEM    HIGH QUALITY AND ECONOMICAL TrueFlex Specifications TrueFlex is a popular product when quick and simple installation is necessary. A high quality product for use in greenhouses, outdoor cooling, odor control, poultry farms, dust suppression and any general humidification application. TrueFlex operates at up to 1200 PSI. TrueFlex is easy to assemble with our simple hose ferrule crimping system. Make simple and reliable coupling attachments with our TrueFog 1/4 inch double ended hose barb with nozzle port for 12/24 TF100 series nozzles and is used with our quality TrueFlex fog line made of Furon Thermoplastic; 4:1 burst pressure, ultra violet resistant. To provide easy in-field fabrication of 3R30-04 TrueFlex fog line. Each barb includes two ferrules for easy assembly. Nozzle, TrueFlex hose and TrueFlex hose crimping tool sold separately.      This industrial duty tool has five steel dies built-in for crimping TrueFlex hose and the TrueFog double ended hose barb fitting with easy, one-hand operation. Made of cast iron. The tool is 12" long and has four 17/64" diameter bolt holes for workbench top mounting.    DESCRIPTION PRICE PART NUMBER Nozzle Port Barb  $ 3.90  # HB1224 Hose Farrels .39 HF114 Brass Nozzle $ 11.95 each 100 BC TrueFlex Fog Line $ 2.69 per foot TF3R30-04 Hose Crimping Tool $ 138.00 each TF5531K41 Hose Cutter $ 23.90 each TF4HL90 TrueFlex Specifications       TrueFog Mist Cooling Fan Conversion Kit INDUSTRIAL DUTY CHROME PLATED STAINLESS STEEL FAN RINGS   This wind tunnel designed and tested quality fog ring was created for simple conversion of any industrial duty fan you choose. Constructed of high quality chrome plated stainless steel. Price includes Eight of our best 12/24 thread size bronze fitted stainless steel series 100B nozzles with each mist cooling fan ring to insure a lifetime of quality dependability and serviceability. This industrial duty fog fan ring produces a super fine 10 micron water droplet with a 0.008" nozzle orifice. 10 micron droplets are 1/10 - the diameter of a human hair. This combination of quality TrueFog components make certain you will experience full and complete evaporation of all moisture created by the system.   The unique check valve on each nozzle prevents the nozzles from dripping after shut down to reduce calcium build-up and eliminate unwanted puddles of water, eliminating slip and fall hazards that our competitive products are known for.  PART NUMBER TUBE SIZE PSI # NOZZLES PRICE EACH TF460SF 3/8 1200 PSI 8 $177.60 TF465SF 3/8 1200 PSI 5 $146.60     SERIES 400B - MIST NOZZLE  COMMERCIAL DUTY BRONZE FITTED, STAINLESS STEEL Designed for use in systems that require nozzles to adapt to 1/8 MPT pipe thread fog line such as cattle cooling and poultry house cooling systems. This 5 year commercial duty nozzle Produces superfine 10 micron water droplets and 0.008" nozzle orifice. 10 micron droplets are 1/10 - the diameter of a human hair. Unique check valve prevents the nozzle from dripping after shut down and reduces calcium build-up. Price includes one attached 5 micron filter and spare filters are sold separately. These nozzles are for intermittent commercial duty FOG applications. All TrueFog, USA Nozzles are delivered fully assembled and ready to install.   PART NUMBER THREAD SIZE PSI FLOW @1000 PRICE EACH TF400B 1/8 MPT 800 PSI 0.0276 $9.95     Replacement nozzle filters for the 400 Series nozzle are sold in packaged quantity's of 100 Priced at $45.00 per package.       NOZZLE PLUGS Nozzle plugs are used to block nozzle outlet ports in areas of fog line where atomization may not be desired. Available in stainless steel with 10/24 and 12/24 thread sizes.   PART NUMBE THREAD SIZE MATERIAL PRICE EACH 100SP 12/24  STAINLESS  $ 2.45 50BP 10/24 BRASS $ 1.95   STAINLESS STEEL NOZZLE SPIGOTS       These stainless steel spigots, sometimes called risers, are designed to be TIG welded to 1/2 inch grade 304 or 316 stainless steel tubing allowing the attachment of our 12/24 thread size series 100 nozzle. This allows for the fabrication of complete stainless steel fog line that has proven the most effective system for long life and trouble free performance in all applications requiring a top quality fogging systems.     PART NUMBER THREAD SIZE MATERIAL GRADE PRICE EACH SS1224-303 12/24 303 STAINLESS $ 1.90 SS1024-303 10/24 303 STAINLESS $ 1.90 SS1224-316 12/24 316 STAINLESS $ 2.90 SS1024-316 10/24 316 STAINLESS $ 2.90     NOZZLE EXTENDER KIT This 2 piece easy to fabricate nozzle extender kit includes both brass inlet and outlet ports to extend series 100 nozzles from the TrueFog line allowing the re-direction of the spray pattern. The Extender kit is also recommended for use as an anti-drip device on overhead systems in interior factory settings. Simply install the device with a curl in the tube allowing the nozzle to rise above the fog line. This arrangement works in conjunction with the anti-drip valve in the nozzle and will help to eliminate any dripping from static line pressure. You supply the 1/4 inch copper tube and simply attach the fittings using the compression fittings to the length required for your application. Nozzle and 1/4 inch copper tube sold separately.     PART NUMBER PRICE EACH 1224BEX $ 9.95       TRUEFLEX FOG LINE & SUPPLY LINE TrueFlex Specifications TrueFlex manufactured exclusively for TrueFog, USA consists of Furon Thermoplastic; 4:1 burst pressure and is ultra violet resistant. Simple and reliable coupling attachments allow for use as both supply line from fog module to fog/nozzle line and for a high quality flexible fog line.  PRODUCT # INSIDE DIA. PSI WEIGHT P/100 PRICE P/FOOT 3R30-04 1/4 - 6 MM 1500 5.3 LBS $ 2.69 3R30-06 3/8 - 10 MM 1250 8.1 LBS $ 3.96 3R30-08 1/2 - 13 MM 1000 14.1 LBS $ 4.78 TrueFlex Specifications     Brass Reusable Hose Fittings         These industrial quality reusable hose fittings are designed for use with our TrueFlex supply or manifold line and TrueFog nozzle line. Made of solid brass bar stock for for superior quality and strength under pressure. Reusable hose fittings are used to make high pressure manifold hose connections. Although there are various styles of reusable hose fittings, such as female solid and swivel and male solid connections. The method used to install them is all the same. Easy to install. Click here to view our online catalog of commonly used brass fittings TrueFlex Specifications PART NUMBER HOSE SIZE MATERIAL GRADE DESCRIPTION PRICE EACH 3 - B1 1/4 BRASS 1/4 MALE SOLID $ 6.15 4 - B1 1/4 BRASS 1/4 FEMALE SOLID $ 10.35 5 R-B1 1/4 BRASS 1/4 FEMALE SWIVEL $ 12.35 3 - B2 3/8 BRASS 3/8 MALE SOLID 14.40 4 - B2 3/8 BRASS 3/8 FEMALE SOLID 14.55 5 R-B2 3/8 BRASS 3/8 FEMALE SWIVEL 19.55 3 - B3 1/2 BRASS 1/2 MALE SOLID 14.40 4 - B3 1/2 BRASS 1/2 FEMALE SOLID 17.80 5 R-B3 1/2 BRASS 1/2 FEMALE SWIVEL 28.15       Odor Control Chemical Injection systems TrueFog, USA's Advantage injectors represent the very best in proportioning equipment today.  The use of 21st century polymers in the construction of both internal and external components allows the widest range of chemical compatibility.  These special compounds ensure a long product life and outstanding accuracy at all flows.  Quick disconnect unions, a special mounting bracket and an exclusive quick seal system means easy installation and maintenance in the field.  Advantage's external ratio adjustment makes setting and changing the ratio fast, easy and accurate.  Reliable, accurate and easy to use, no other proportioning product on the market today provides more value for your money than the Advantage.     $590.00                TRUEFOG, USA - TRIPLE FILTRATION SYSTEM The TrueFog 10-5-1 Micron Triple filtration system is designed to remove sediment, rust, and sand from all the water entering your TrueFog pump module and help prevent nozzle blockage from foreign debris. The TrueFog filtration system works to avoid sediment build up in your system helping to protect your fog module and nozzles from pre-mature service caused by excessive build-up calcium deposits and other foreign matter blocking the nozzle orifice.     Click here to learn more about TrueFog, USA Water Filters and Filtration Systems    PART NUMBER PRICE EACH TF1O1C $158.00 Economical                                                                                                       Total Humidity CONTROL  TrueFog, USA's Total Humidity Controller. The THC can be switched between humidify and dehumidify for removing unwanted atmospheric moisture accumulating within an enclosed area or to add needed moisture to the air by means of the TrueFog humidification system. The THC-1 humidity switch controls the TrueFog system by providing power when humidity varies from the adjustable set point.  In the dehumidifying mode high humidity conditions will activate fans or other dehumidifying apparatus until level drops approximately 5% in relative humidity. At this point dehumidifying equipment is disabled until humidity increases again 5%. The humidity controller is designed specifically for the control humidity in interior environments such as greenhouses, wine barrel storage rooms, wood and furniture processing and manufacturing plants. Easy to set and operate. The anodized aluminum enclosure provides a durable and attractive housing which will never corrode or discolor from hot, cold or humid environments. The large dial face is easy to read and adjust. This unit can be used independently or as part of a combination of control devices to coordinate numerous atmospheric functions. This controller can be switch from humidify to dehumidify with the push of a button. In the humidifying mode this control operates the TrueFog equipment by activating pump. The TrueFog System can be precisely controlled according to atmospheric humidity to create ideal conditions for any environment. The 110V outlet receptacle receives power when atmospheric moisture content becomes less then your preset minimum allowable percentage.   Switches 120V at 15 amp maximum. Sensor allows a 5% (differential) comfort zone between "on" and "off" functions.  Features Microprocessor controlled for improved accuracy Accurate control between 5-95% RH with a 5% differential for improved response Relative humidity with built-in temperature compensation Perfect for fogged gardens and greenhouses Humidify or dehumidify with the"push of a button" Fully integrable with other atmospheric controls & timers Available with "on-board" humidity sensor or 20-foot patch-cord with "remote" sensor Anodized, black, aluminum chassis resists rusting, corrosion & scratching Red, illuminated power switch 14 AWG, SJTW rated, piggy-back power cord Operates on 120 VAC with 15 Amp switching capacity 30 Amp relay for reliability Manufactured in Oregon, USA Specifications Humidistat Range: 5-95% RH Humidistat Differential: 5% RH Operating Temperature: 32-120ºF (0-50ºC) Operating Humidity: Non-Condensing Environment (0-95% RH) Voltage Input: 120 VAC Voltage Output: 120 VAC Max Amperage Rating: 15 AMPS Frequency: 60 Hz Dimensions: 4” Wide x 5-7/8” High x 2¼” Deep (10cm x 15cm x 6cm) Power Cord: 6-ft, piggy-back 14 awg, SJTW rated External Sensor Connection: Std RJ-11 patchcord   PRICE  $690.00       TrueFog, USA - Industrial Humidification Systems P.O. Box 2865 410 East Fairway Boulevard Big Bear City, CA  92314-2865 Phone (909) 584-4360 - Fax (909) 584-4370 For additional information, E-Mail: sales@truefog.com    COPYRIGHT 2001 ©  ALL RIGHTS RESERVED